Imagine these different scenarios, you need to commute but it’s just that little bit too far to cycle on a regular bike and you don’t want to arrive all sweaty!, or you are in a busy area and the heavy traffic congestion is getting you down. Parking a car is also an issue. Today an e-bike is a real alternative to taking the car, clean and cheap to run (virtually free actually) you no longer have to suffer the constraints of normal transport PLUS you can go pretty much ANYWHERE!
We have been working on DIY e-bike builds for many years now and we have now put together a kit that you can apply to any regular bicycle that will turn it into an e-bike, or more rather a car replacement.
BPEB/Kirbebike conversion kits include everything you need in the box to make an e-bike. The powerful 250W motor is pre-fitted to a strong rear wheel (full range of sizes available) so all you have to do is remove your existing rear wheel, swap the tyre and brake disc (or use rim brakes) and fit the Kirbebike motor wheel to your frame, connect the controller, pedal sensor, battery and away you go.
The hub motor is completely silent and smooth due to the high quality sine wave controller, speed is controlled by the pedal sensor.
BPEB/Kirbebike kits come with a vivid colour dashboard screen which mounts on the handlebars, this shows road speed, motor and controller temperature, motor power, trip and more. No external sensors are needed as the display gets all of it’s data directly from the controller itself.
7 speed sprocket is included pre fitted to the motor wheel to make installation even easier.
Recommended battery is the BPEB ION-PLUS 36V 13Ah or ION-PLUS 36V 14.5Ah, Battery is included with the full kit.
Full Sine Wave smart controller (programmable)
Max Speed 15.5Mph / 25kph
Pedal sensor (8 Magnet) and thumb throttle support
Colour TFT display with handlebar on/off switch and controls for settings menu etc
Various rim sizes available
7 Speed Sprocket included